Warm White LED Neon Flex 220V 240V Wireless 8x16mm 120LEDs/m IP65 With UK Plug

Warm White 3000K Neon Flex Wireless – 8x16mm | 220V–240V | 120 LEDs/m

Our Warm White 3000K LED Neon Flex is perfect for creating a wide range of lighting environments using just one product. It produces a bright, continuous glow with 120 LEDs per metre, distributed evenly over a 120º beam angle. This flexible strip is ideal for accent lighting in homes, bars, restaurants, and more.

The latest wireless LED Neon Flex technology eliminates the need for internal wiring. Instead, it uses a pure copper sheet, making the strip more flexible, brighter, and cuttable every 20cm for precise customisation. Unlike traditional versions that require 2-pin connections, the wireless neon flex simplifies installation — just use the dedicated wireless connector, with no soldering or pin alignment needed.

The 8x16mm Neon Flex is horizontally bendable and can be cut every 1 metre, making it highly adaptable for creative projects. The design is more energy-efficient than traditional glass neon, using up to 80–90% less power. The lights are cut from a 50-metre roll and prepared to match your specific requirements.

Each strip comes with a 1-year warranty for indoor and outdoor applications when properly sealed and installed. The controller is not waterproof and must be housed in a dry, waterproof enclosure when used outdoors.

Rated IP65, this neon flex is suitable for indoor use and light outdoor environments where only mild water splashes or moisture may be present (e.g. covered patios or sheltered façades). It is not intended for extreme weather conditions or high-exposure areas. Do not use near swimming pools, saunas, bathrooms, or underwater. For outdoor use, ensure heatshrink tubing and silicone sealant are applied thoroughly at the end cap and front connection to prevent water ingress.

In the package:
1 x LED Neon Flex
1 x RGB Controller with Remote
1 x Pack of Clips (1 clip per metre)

Important Installation Notice:

This product is not suitable for recessed outdoor installations on the ground or any surface exposed to direct water or heavy weather. For such applications, we recommend using IP67 or IP68-rated neon flex, which is specifically designed for outdoor recessed use and offers higher protection against water and environmental conditions.

Please note that any modification or improper use of this product will void the warranty. In particular, hardwiring this light is not supported and will invalidate the warranty. It must be connected using the provided plug. If you require a hardwired installation, please choose one of our DC voltage neon flex lights (12V or 24V or 48V), which are designed for that purpose.

If you have any questions or need help selecting the right product for your project, feel free to contact our team at [email protected] — we’re here to help.

Specifications

• Colour: Warm White 3000K
• Voltage: 220V 240V AC
• Power: 9W/m
• LEDs per metre: 120 LEDs
• Cut Points: 20cm 
• CRI: >80
• Beam Angle: 120°
• Dimensions: (W)8mm x (H)16mm
• Lumens per metre: Up to 790lm
• Warranty: 1 Years
• IP Rating: IP65 (suitable for indoor and limited outdoor use)
• Dimming: Yes